Wiki source code of Radio Log
Version 13.3 by Treyfane Dingo on 2025/04/07 21:09
Show last authors
| author | version | line-number | content |
|---|---|---|---|
| 1 | (% data-widget="image" contenteditable="false" tabindex="-1" %)[[image:radiolog1.png]](% title="Click and drag to resize" %) | ||
| 2 | |||
| 3 | |||
| 4 | The Radio Log is a module, which can be called by pressing F8 anywhere in L.A.S.S.I.E.. It will be available if L.A.S.S.I.E. is connected to a [[Pi-Star>>https://www.pistar.uk/]] with [[pistarlog2ws>>https://git.furcom.org/Dingo/pistarlog2ws]] installed (green antenna symbol) and subsequently show the DMR radio traffic. | ||
| 5 | |||
| 6 | = Pi-Star = | ||
| 7 | |||
| 8 | == Installation == | ||
| 9 | |||
| 10 | Pi-Star has to be installed on a Raspberry Pi (Zero) with a MMDVM HAT. A non-duplex MMDVM HAT is fully sufficient since Pi-Star only can monitor one single frequency and sending is not something this setup is expected to do. See [[https:~~/~~/www.pistar.uk/downloads/>>https://www.pistar.uk/downloads/]] for download and installation instructions. | ||
| 11 | |||
| 12 | The SD card for the Raspberry Pi will be flashed using [[Raspberry Pi Imager>>https://www.raspberrypi.com/software/]]. During the process, you will be asked if you like to apply OS customization settings. You can change the //hostname//, //wireless LAN// and //locale settings// here. **Do not set username and password, or anything in the Services or Options tab!** | ||
| 13 | |||
| 14 | **~ **[[image:radiolog_set3.png]] | ||
| 15 | |||
| 16 | After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star Webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]] | ||
| 17 | |||
| 18 | == Configuration == | ||
| 19 | |||
| 20 | After installing Pi-Star, the following configuration should be used for the Radio Log. |