Skip to Content

Wiki source code of Radio Log

Version 13.2 by Treyfane Dingo on 2025/04/07 21:07
Hide last authors
Treyfane Dingo 12.2 1 (% data-widget="image" contenteditable="false" tabindex="-1" %)[[image:radiolog1.png]](% title="Click and drag to resize" %)​
Treyfane Dingo 2.2 2
Treyfane Dingo 2.3 3
Treyfane Dingo 5.3 4 The Radio Log is a module, which can be called by pressing F8 anywhere in L.A.S.S.I.E.. It will be available if L.A.S.S.I.E. is connected to a [[Pi-Star>>https://www.pistar.uk/]] with [[pistarlog2ws>>https://git.furcom.org/Dingo/pistarlog2ws]] installed (green antenna symbol) and subsequently show the DMR radio traffic.
5
Treyfane Dingo 12.2 6 = Pi-Star =
Treyfane Dingo 5.3 7
Treyfane Dingo 12.10 8 == Installation ==
Treyfane Dingo 10.8 9
Treyfane Dingo 12.2 10 Pi-Star has to be installed on a Raspberry Pi (Zero) with a MMDVM HAT. A non-duplex MMDVM HAT is fully sufficient since Pi-Star only can monitor one single frequency and sending is not something this setup is expected to do. See [[https:~~/~~/www.pistar.uk/downloads/>>https://www.pistar.uk/downloads/]] for download and installation instructions.
Treyfane Dingo 10.14 11
Treyfane Dingo 12.10 12 The SD card for the Raspberry Pi will be flashed using [[Raspberry Pi Imager>>https://www.raspberrypi.com/software/]]. When using the Imager, you will be asked if you like to apply OS customization settings. You can change the hostname, wireless LAN and locale settings here. **Do not set an username or password, or anything in Services or Options tab!**
Treyfane Dingo 12.2 13
Treyfane Dingo 13.2 14 **~ **[[image:radiolog_set3.png]]
15
Treyfane Dingo 12.18 16 After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star Webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]]
Treyfane Dingo 12.10 17
18 == Configuration ==
19
Treyfane Dingo 12.18 20 After installing Pi-Star, the following configuration should be used for the Radio Log.