Skip to Content

Changes for page Radio Log

Last modified by Treyfane Dingo on 2025/04/27 13:33
From version 18.1
edited by Treyfane Dingo
on 2025/04/07 21:18
Change comment: Uploaded new attachment "radiolog_cfg5.png", version {1}
To version 18.5
edited by Treyfane Dingo
on 2025/04/07 21:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,8 +13,11 @@
13 13  
14 14  **~ **[[image:radiolog_set3.png]]
15 15  
16 -After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star Webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]]
16 +After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]]
17 17  
18 +Default Username: pi-star
19 +Default Password: raspberry
20 +
18 18  == Configuration ==
19 19  
20 20  After installing Pi-Star, the following configuration should be used for the Radio Log. First, in the “MMDVMHost Configuration” section the DMR Mode should be enabled. Please remember to press “Apply Changes” after changing every section.
... ... @@ -29,9 +29,13 @@
29 29  
30 30  [[image:radiolog_cfg3.png]]
31 31  
32 -In the “Wireless Configuration”, the IP address of the Pi-Star acquired by DHCP is shown. This IP address has to be configured as “IP for a FurCom Services Radio Log system” in L.A.S.S.I.E. (System Settings
35 +In the “Wireless Configuration”, the IP address of the Pi-Star acquired by DHCP is shown. This IP address has to be configured as “IP for a FurCom Services Radio Log system” in L.A.S.S.I.E. (System Settings → General Settings).
33 33  
34 34  [[image:radiolog_cfg4.png]]
35 35  
39 +For the configuration to be completed and usable, you should change the default password to something more secure. Please remember
36 36  
41 +[[image:radiolog_cfg5.png]]
42 +
43 +
37 37