Skip to Content

Changes for page Radio Log

Last modified by Treyfane Dingo on 2025/04/27 13:33
From version 17.1
edited by Treyfane Dingo
on 2025/04/07 21:14
Change comment: Uploaded new attachment "radiolog_cfg4.png", version {1}
To version 21.2
edited by Treyfane Dingo
on 2025/04/07 21:40
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,7 +5,7 @@
5 5  
6 6  = Pi-Star =
7 7  
8 -== Installation ==
8 +== OS Installation ==
9 9  
10 10  Pi-Star has to be installed on a Raspberry Pi (Zero) with a MMDVM HAT. A non-duplex MMDVM HAT is fully sufficient since Pi-Star only can monitor one single frequency and sending is not something this setup is expected to do. See [[https:~~/~~/www.pistar.uk/downloads/>>https://www.pistar.uk/downloads/]] for download and installation instructions.
11 11  
... ... @@ -13,20 +13,36 @@
13 13  
14 14  **~ **[[image:radiolog_set3.png]]
15 15  
16 -After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star Webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]]
16 +After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]]
17 17  
18 +Default Username: pi-star
19 +Default Password: raspberry
20 +
18 18  == Configuration ==
19 19  
20 -After installing Pi-Star, the following configuration should be used for the Radio Log. First, in the “MMDVMHost Configuration” section the DMR Mode should be enabled. Please remember to press “Apply Changes” after changing every section.
23 +After installing Pi-Star, the following configuration should be used for the Radio Log. First, in the “General Configuration” section the Radio Frequency has to be set to the **output** frequency of your DMR repeater. Also the correct Radio/Modem Type has to be selected, depending on the MMDVM HAT used, and the Node Type has to be set to “Public”. **Please remember to press “Apply Changes” after changing every section.** Depending on the changes some options may only show after pressing “Apply Changes”.
21 21  
25 +[[image:radiolog_cfg2.png]]
26 +
27 +(% id="cke_bm_335101S" style="display:none" %) (%%)In the “MMDVMHost Configuration” section the DMR Mode should be enabled.
28 +
22 22  [[image:radiolog_cfg1.png]]
23 23  
24 -In the “General Configuration” section the Radio Frequency has to be set to the **output** frequency of your DMR repeater. Also the correct Radio/Modem Type has to be selected, depending on the MMDVM HAT used, and the Node Type has to be set to “Public”.
31 +After enabling the DMR Mode in the “MMDVMHost Configuration” section, you should head over to “Expert” → “MMDVMHost” in the top menu. Here it is imperative to set Enable = 0 in
25 25  
26 -[[image:radiolog_cfg2.png]]
33 +[[image:radiolog_cfg2b.png]]
27 27  
28 -In the “DMR Configuration” section it is imperative to disable all three Networks
35 +In the “DMR Configuration” section it is imperative to disable all three Networks. We don't want to have the Radio Log Pi-Star send out our private DMR communication to the world after all.
29 29  
30 30  [[image:radiolog_cfg3.png]]
31 31  
39 +In the “Wireless Configuration”, the IP address of the Pi-Star acquired by DHCP is shown. This IP address has to be configured as “IP for a FurCom Services Radio Log system” in L.A.S.S.I.E. (System Settings → General Settings).
40 +
41 +[[image:radiolog_cfg4.png]]
42 +
43 +For the configuration to be completed and usable, you should change the default password to something more secure. Please remember the password!
44 +
45 +[[image:radiolog_cfg5.png]]
46 +
47 +
32 32  
radiolog_cfg2a.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.dingo
Size
... ... @@ -1,0 +1,1 @@
1 +23.1 KB
Content
radiolog_cfg2b.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.dingo
Size
... ... @@ -1,0 +1,1 @@
1 +26.9 KB
Content