Changes for page Radio Log

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -5,12 +5,42 @@
5	5
6	6	= Pi-Star =
7	7
8		-== Configuration ==
	8	+== OS Installation ==
9	9
10	10	Pi-Star has to be installed on a Raspberry Pi (Zero) with a MMDVM HAT. A non-duplex MMDVM HAT is fully sufficient since Pi-Star only can monitor one single frequency and sending is not something this setup is expected to do. See [[https:~~/~~/www.pistar.uk/downloads/>>https://www.pistar.uk/downloads/]] for download and installation instructions.
11	11
12		-The SD card for the Raspberry Pi will be flashed using [[Raspberry Pi Imager>>https://www.raspberrypi.com/software/]]. When using the imager, you will be asked if you like
	12	+The SD card for the Raspberry Pi will be flashed using [[Raspberry Pi Imager>>https://www.raspberrypi.com/software/]]. During the process, you will be asked if you like to apply OS customization settings. You can change the //hostname//, //wireless LAN// and //locale settings// here. **Do not set username and password, or anything in the Services or Options tab!**
13	13
14		-After Pi-Star is installed (), the following configuration should be done.
	14	+**~ **[[image:radiolog_set3.png]]
15	15
16		-(% contenteditable="false" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhDgAOAIAAAAAAAP///yH5BAAAAAAALAAAAAAOAA4AAAIMhI+py+0Po5y02qsKADs=]][[image:data:image/gif;base64,R0lGODlhDgAOAIAAAAAAAP///yH5BAAAAAAALAAAAAAOAA4AAAIMhI+py+0Po5y02qsKADs=]](% style="background-image:url(https://wiki.furcom.org/webjars/wiki%3Axwiki/xwiki-platform-ckeditor-webjar/16.10.5/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]][[image:radiolog_cfg3.png]][[image:radiolog_cfg4.png]][[image:radiolog_cfg5.png]]
	16	+After flashing and booting the Raspberry from the SD card, you should be able to access the Pi-Star webinterface via browser at e.g. [[http:~~/~~/radiolog.local/admin/>>http://radiolog.local/admin/]]
	17	+
	18	+Default Username: pi-star
	19	+Default Password: raspberry
	20	+
	21	+== Configuration ==
	22	+
	23	+After installing Pi-Star, the following configuration should be used for the Radio Log. First, in the “General Configuration” section the Radio Frequency has to be set to the **output** frequency of your DMR repeater. Also the correct Radio/Modem Type has to be selected, depending on the MMDVM HAT used, and the Node Type has to be set to “Public”. **Please remember to press “Apply Changes” after changing every section.** Depending on the changes some options may only show after pressing “Apply Changes”.
	24	+
	25	+[[image:radiolog_cfg2.png]]
	26	+
	27	+(% id="cke_bm_335101S" style="display:none" %) (%%)In the “MMDVMHost Configuration” section the DMR Mode should be enabled.
	28	+
	29	+[[image:radiolog_cfg1.png]]
	30	+
	31	+After enabling the DMR Mode in the “MMDVMHost Configuration” section, you should head over to “Expert” → “
	32	+
	33	+In the “DMR Configuration” section it is imperative to disable all three Networks. We don't want to have the Radio Log Pi-Star send out our private DMR communication to the world after all.
	34	+
	35	+[[image:radiolog_cfg3.png]]
	36	+
	37	+In the “Wireless Configuration”, the IP address of the Pi-Star acquired by DHCP is shown. This IP address has to be configured as “IP for a FurCom Services Radio Log system” in L.A.S.S.I.E. (System Settings → General Settings).
	38	+
	39	+[[image:radiolog_cfg4.png]]
	40	+
	41	+For the configuration to be completed and usable, you should change the default password to something more secure. Please remember the password!
	42	+
	43	+[[image:radiolog_cfg5.png]]
	44	+
	45	+
	46	+